PRODUCT DESCRIPTIONAddressable sounder beacon device – base with built-in short-circuit isolator and accumulator battery, is used for sound and flash indication on registered events by the Interactive fire alarm panel IFS7002. The FD7204 is used for ..
PRODUCT DESCRIPTIONThe 71CNG detector is applicable for detection of natural gas (methane) in the protected area. The status of the detector is indicated with its built-in LEDs and built-in Sounder and meanwhile monitored and controlled from the IFS7..
PRODUCT DESCRIPTIONThe optical smoke fire detector provides reliable early warning of a Fire condition responding to fixed threshold smoke concentration detected in the protected premises.The smoke sensitivity is factory preset in accordance with Eur..
PRODUCT DESCRIPTIONThe manual call point FD7150 is designed for indoor installation as a component of an Addressable Fire Alarm System IFS7000 series.The unit is compatible with the requirements of the European Standard EN54-11:2001/A1:2005, EN54-17:..
PRODUCT DESCRIPTIONInterface Module RS232/485 is designed for implementing the communication function between fire control panels and a personal computer or between fire control panels, connected into a network. The module is installed in Fire Contro..
PRODUCT DESCRIPTIONSB 112F is designed to signalize for fire sound signal in fire alarm systems. The sounder is compatible with fire alarm panels, which provide in alarm mode output 24 V.SB 112F is high frequency armored sounder. The box is produced ..
PRODUCT DESCRIPTIONThe fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises.It is available in two versions (A2R or BR) depending on..
PRODUCT DESCRIPTIONThe fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance..
PRODUCT DESCRIPTIONDB 8000 – Standard Base – Common base, applicable for the standard fire alarm installations.DB 8000D – Base with schottky diode – Further improvement of the operation reliability through the built-in diode for removed fir..
PRODUCT DESCRIPTIONRepeater FS5200R is a unit supplementing the range of 5000 series products expanding the possibilities of the fire detecting and fire extinguishing systems built on the basis of fire control panels FS5100, FS5200, FS5200E and FS400..
PRODUCT DESCRIPTIONDesigned for sound signal of activated automatic fire detector Power supply - ( 5 - 30)V DC
Connection to fire detector - two-wire line
Colour of he light signalling /RI 31/ - red
Sound pressure /RI 31S/ - at least 60 dB
PRODUCT DESCRIPTIONTD-110 is an automatic dialing device that transmits a prerecorded voice message to 4 telephone numbers in an ordinary or mobile telephone system. TD-110 can be triggered manually or from another (third party) device connected to t..
PRODUCT DESCRIPTIONThe DOP6001 beam smoke detector is designed for detection of smoke, nascent at the beginning stage of fire. It is especially suitable for protection of rooms, in which appearing of smoke, in the first phase of fire origin, is expec..
متلائمة مع جميع الأنواعPRODUCT DESCRIPTIONThe conventional indoor sounder 8204 is applicable for sound and LED indication of events registered in Fire Alarm Systems.8204 is compatible with EN54-3.Technical parametersVoltage: &..
PRODUCT DESCRIPTIONModule FD 4201 expands the options of fire control panel FS4000.It allows:– Connection of fire control panel FS4000 in a system of a repeater FS5200R and/or several remote fire control panels FS4000, FS5100, FS5200, FS5200E;– Comma..
PRODUCT DESCRIPTIONFire control panel FS4000 is designed to operate with conventional automatic fire detectors and manual call points. The panel has outputs provided for external executive devices.The unit is produced in four versions:2 fire alarm li..
PRODUCT DESCRIPTIONFS5200E is already certified by EVPU!!!The Fire Extinguishing Control Panel is designated for fire protection, monitoring and control of systems for active extinguishing – gas, powder, aerosol, water, etc. After processing the sign..