PRODUCT DESCRIPTIONThe 71CNG detector is applicable for detection of natural gas (methane) in the protected area. The status of the detector is indicated with its built-in LEDs and built-in Sounder and meanwhile monitored and controlled from the IFS7..
PRODUCT DESCRIPTIONThe manual call point FD7150 is designed for indoor installation as a component of an Addressable Fire Alarm System IFS7000 series.The unit is compatible with the requirements of the European Standard EN54-11:2001/A1:2005, EN54-17:..
Cooper CBG370S Intelligent Addressable Call Point (MBG813 / FXN501)
Two versions of intelligent addressable callpoints are available in this range, the (CBG370S) which can be either surface or flush mounted and the (CBG370WP) which is a weatherpro..
This range of analog detectors is designed specifically to operate with analogue fire detection systems Cooper Fire Systems. All detectors are approved by bodies certain indicators in accordance with the relevant sections of EN 54 (p..
Electrical Cabinet Detector Head
غطاء خاص بكواشف الدخان و الحرارة يتم تركيبة فوق اللوحات الكهربائية
• Low profile, 1.8" high (with base)
• 2 or 4 wire base compatibility, relay bases available
• Highly stable operation, RF/Transient prot..
Our protective manual call point covers provide a universal, cost effective solution in preventing accidental activation. They fit most standard conventional and addressable manual call points or break glass units as well as standard access control ..
Manual Call Point GREEN Color
As a means to manually trigger fire alarms, manual call points play an important part in building a strong defense against fire hazards. In stressful, dangerous situations it is essential that the alarm can be activat..
As a means to manually trigger fire alarms, manual call points play an important part in building a strong defense against fire hazards. In stressful, dangerous situations it is essential that the alarm can be activated quickly, easily and reliably f..
Manual Call Point Yellow Color used for Fire Extinguishing System
As a means to manually trigger fire alarms, manual call points play an important part in building a strong defense against fire hazards. In stressful, dangerous situations it is ess..
Tyco 614 Series Detectors • Range includes combined Carbon Monoxide (CO) and Heat, Photoelectric (Scattered Light) and Ionisation fire detectors • Type A, B, C and D Heat Detectors • Superior performance and reliability • Patented Optical Chamber • D..
PRODUCT DESCRIPTIONThe fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance..
PRODUCT DESCRIPTIONDB 8000 – Standard Base – Common base, applicable for the standard fire alarm installations.DB 8000D – Base with schottky diode – Further improvement of the operation reliability through the built-in diode for removed fir..
Series 65 incorporates well-proven sensing technologies, including an Integrated Circuit based on that used in XP95 analogue addressable detectors.
The Series 65 range has a wide operating voltage of 9–33V and consists of ionisation, integrating i..
The photoelectric smoke detector manufactured by TELEFIRE is equipped with a unique and sensitive sensor designed to detect smoke from various combustion sources.
The TFO-480A from TELEFIRE is a smart detector with an independent address, which al..
Conventional Heat Detector: Series 65A
Standard Features & Overview
The Series 65A Heat Detectors monitor temperature by using a dual thermistor network which produces a voltage output proportional to the external air temperature.
Product descriptionDegree of protection: IP 43
Operation temperature: Minus 10°C to 55°C
Relative humidity: (93±3) % at 40°C
Sensitivity: In accordance with EN54-7
Mounting: Using base type 7100
Dimensions (base included): Ø100, h 47 mm
PRODUCT DESCRIPTIONThe button operates with Control Panel FS 5200E and activates the extinguishing.It is to be installed close to the object of extinguishing.By means of this button forced extinguishing process can be started only after visual inspec..
• Integral sensor shorting link
• Separate loop in and loop out terminals
• Stand off fixing feature
• Accepts side entry cables
• Selectable sensor locking feature
• Quick and simple to install
• Common mo..